Nokia 6019i - 2. Set up your phone

background image

2. Set up your phone

Antenna

Your phone has two antennas:

The retractable antenna is active when fully

extended (1).

The internal antenna is always active (2).

In the Nokia 6015i phone, the GPS antenna is also
internal and is activated when placing emergency
calls or when

On

is selected from the

Location info

sharing

menu. For more information on location

info sharing, see Location info sharing, 50.

Your device has an internal antenna located towards the top of the
phone. Hold the phone as you would any other telephone with the
antenna area pointed up and over your shoulder.

Note: As with any other radio transmitting device, do
not touch the antenna unnecessarily when the device is
switched on. Contact with the antenna affects call
quality and may cause the phone to operate at a higher
power level than otherwise needed. Avoiding contact
with the antenna area when operating the phone
optimizes the antenna performance and the battery life.

background image

14

Copyright © Nokia 2004

Battery

Always switch the device off, and disconnect the charger before removing the battery.

Remove the back cover

1. With the back of the phone facing you,

push down on the back cover release

button.

2. Slide the back cover toward the bottom of

the phone and remove.

Remove the battery

After you have removed the back cover, insert your
finger into the finger grip, and lift the battery from
its compartment.

Replace the battery

1. Position the battery so the positive and

negative indicators on the battery match up

with the positive and negative indicators on

the phone.

The battery label should be facing away from

the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

Slide the back cover toward the top of the
phone until the back cover is securely in place.

background image

15

Copyright © Nokia 2004

Set up your phone

Charge the battery

1. Plug the charger into a standard ac outlet.

2. Insert the charger output plug into the

round jack at the bottom end of the phone.

After a few seconds, the battery indicator in

the display starts to scroll from bottom to

top. If the battery is completely discharged,

it may take a few minutes before the

charging indicator appears on the display or

before any calls can be made.

Turn your phone on or off

1. To turn your phone on or off, press and hold the

Power key on top of the phone for at least 3 seconds.

2. Enter the lock code - see Security settings, 62 if

necessary and press

OK

.

Connect the headset

A compatible headset, such as HS-5, may be purchased
with your phone or separately as an enhancement. (See
Enhancements, 88 for information.)

1. Plug the headset connector into the

Pop-Port™ connector at the bottom end

of your phone. The

icon appears on

the start screen.

2. Position the headset on your ear.

With the headset connected, you can

make, answer, and end calls as usual.

Use the keypad to enter numbers.

Press the Talk key to place a call.

Press the End key to end a call.

background image

16

Copyright © Nokia 2004

You can also plug a compatible headset into the 2.5mm headset jack on the side of your
phone to allow hands-free operation. (See Enhancements, 88 for information.)

Change the Xpress-on™ covers

Note: Before removing the cover, always switch off the power, and disconnect
the charger and any other device. Avoid touching electronic components while
changing the covers. Always store and use the device with the covers attached.

Remove the back cover

With the back of the phone facing you, push
down on the back cover release button, and slide
the back cover toward the bottom of the phone.

Remove the battery

After you have removed the back cover, insert
your finger into the finger grip, and lift the
battery from its compartment.

Remove the front cover

Gently pull the bottom of the front cover away from
the rest of the phone.

Install the keymat and front cover

1. Remove the keymat from the old front cover.

background image

17

Copyright © Nokia 2004

Set up your phone

2. Place the keymat into the new front cover.

3. Press the front cover and keymat against the

phone, and snap the front cover into place.

Warning: Always replace the front cover
before replacing the battery and the back cover. Replacing the back cover first
may cause damage to your phone.

Replace the battery

1. Position the battery so the positive and

negative indicators on the battery match up

with the positive and negative indicators on

the phone.

The battery label should be facing away from

the phone.

2. Insert the battery, gold-colored contact end first, into the battery slot.

3. Push down on the other end of the battery to snap the battery into place.

Replace the back cover

1. Verify that the front cover and battery have

already been replaced.

2. Slide the back cover toward the top of the

phone until the back cover is securely in

place.

background image

18

Copyright © Nokia 2004

Make a call

Note: Before making or receiving a call, fully extend the retractable antenna.

Using the keypad

1. Enter the phone number (including the area code), and press the Talk key. (To delete

a character to the left of the cursor, press

Clear

.)

2. Press the End key to end the call, or

End call

to cancel the call attempt.

Using the contacts list

1. At the start screen, scroll up or down to the entry you wish to view.

2. Press the Talk key to make the call, or press

Details

to view details of the entry.

Using the last dialed number

1. At the start screen, press the Talk key to display the last 20 numbers dialed.

2. Scroll to the number (or name) you wish to redial, and press the Talk key.

Conference calling

Conference calling is a network service that allows you to take part in a conference call
with two other participants.

1. Make a call to the first participant.

2. With the first participant on the line, select

Options

>

New call

.

3. Enter the phone number of the second participant, or press

Search

to retrieve a

number from the contacts list.

4. Press

Flash

.

The first participant is put on hold.

5. When the second participant picks up, press the Talk key to connect the calls.

6. To end the conference call, press

Options

>

End all calls

, or press the End key.

background image

19

Copyright © Nokia 2004

Set up your phone

Answer calls

Answer or silence/reject an incoming call

1. Press the Talk key or

Answer

to answer the call.

2. Press the End key or

Silence

/

Reject

(carrier dependent) to mute the ringing tone;

then press

Answer

to answer the call, or do nothing, and the call is eventually

diverted to voicemail.

Answer or silence/reject an incoming call

Note:

Silence

/

Reject

is a carrier dependent feature.

1. Press the Talk or

Answer

key to answer the call.

2. To mute the ringing tone, press

Silence

. If you don’t answer the call, the call is

eventually diverted to voicemail.

3. To dismiss and divert the call to voicemail (a carrier dependent feature), press

Dismiss

after you have muted the ringing tone or press the End key at any time.

Answer a call with the keypad locked

To answer a call with the keypad locked, simply press the Talk key. During the call, all
features function as normal. When you end or silence/reject the call, the keypad
automatically relocks. See Keyguard, 21 for details.

When the keypad is locked, calls still may be possible to the official emergency number
programmed into your phone.

Adjust the earpiece volume

While in a call, scroll right or left to adjust the volume of the earpiece.

When adjusting the volume, a bar chart appears in the display indicating the volume
level.

background image

20

Copyright © Nokia 2004

Using the loudspeaker

You can use your phone as a loudspeaker during a call. Do not hold the phone to your
ear during the loudspeaker operation. While in a call:

To activate the loudspeaker, press

Loudsp

.

To deactivate the loudspeaker during a call, press

Handset

.

The loudspeaker is deactivated automatically when a call (or a call attempt) ends or
when certain enhancements are connected.

Options during a call

Many of the options that you can use during a call, are network services. Check with
your wireless service provider for more information.

1. Press

Options

during a call to display the following options:

Mute

/

Unmute

—Silence your end of the call.

Loudspeaker

/

Handset

—Activate or deactivate the loudspeaker while in a call.

New call

—Initiate a conference call. See Conference calling, 18 for information.

Save

—Save the number you keyed in during a call.

Add to name

—Save the number you keyed in during a call to a contact already in the

contacts list.

End all calls

—Disconnect from all active calls.

Touch tones

—Enter the numbers, and press

Tones

to send the numbers as tones.

Contacts

—View the contacts list.

Menu

—View the phone menu.

2. Scroll to an option, and press

Select

to activate the option or enter its submenu.

background image

21

Copyright © Nokia 2004

Set up your phone

Keyguard

With keyguard, you can lock the keypad to prevent keys from being pressed accidentally.
Remember to lock your phone keypad to prevent accidental calls. If the keypad is locked,
it unlocks when you receive a call. After the call, the lock automatically reactivates.

When the keyguard is on, calls still may be possible to the official emergency number
programmed into your phone. Key in the emergency number, and press the Talk key. See
Automatic keyguard, 55.

Lock the keypad

Select

Menu

; then press * within 2 seconds.

Unlock the keypad

Select

Unlock

; then press * within two seconds.

background image

22

Copyright © Nokia 2004